Update on the Wood Burning Pool Heater How Well Does it Work

I have had quite a few requests to provide some more detailed information on how well the wood burner works.  I would like to share some temperatures with you using a AGPtek Dual Two Channel Digital Thermometer.

I have been very happy with how well this pool heater has worked for us this year. We have had such a cold summer here in Michigan this year and this heater has been one of the only reasons we have been able to enjoy the pool. Normally, the solar heater and solar cover can keep the pool comfortable but this year it has just not been adequate. I have run the wood burning heater only when needed, maybe once or twice per week at the most. We have been able to easily keep the pool temperature above 75 degrees so far this year.

The numbers and methods here are just for rough estimation of how well the heater works, this is not meant for the science books, but should hold true with a heater of similar size and efficiency.

I measured about 69 gallons per hour with a 33 degree average warm up to the water. This was with an average sized fire going as the temperature here will fluctuate as you add wood and let it burn through. I have seen it as high as 45 degrees and as low as 15 degrees, so it just depends on how much and what material you are burning.

Calculations I used:  15,000 gallon pool divided by 69 gallons per hour (filled one gallon in 52 seconds) gave me 217 hours to heat all of the water 33 degrees. Or if you reduce, it comes down to about 27 hours for 4 degree rise for the entire pool. You can also just divide 33/217 to get a coefficient that can be used to create a formula. Y = .15x where Y is the degrees you will heat 15000 gallons of water and x is the number or hours you run the heater. So if we plug in 24 hours for x we get y=3.6 degrees Fahrenheit.

Hopefully that makes sense to be used as a ROUGH estimate for calculating how much you can heat a similar sized pool.





Products:

                      

This post has been shared at:  The Homestead Barnhop, Simple Saturdays Blog Hop, The Backyard Farming Connection Hop, Natural Living Monday, Frugal Crafty Home Blog Hop

Read more

Create a Raised Bed Garden Using Pallet Wood 100 Free!

We are finally getting our square foot gardens setup.  I needed ways to save money and build some nice raised beds for the backyard. In this video, I go through the process that I used to tear down some pallets and create a couple of 3 x 6 raised-bed gardens. This is one of the first projects that I have done that was truly 100% free!


Please let me know if you have any questions.

Todd


For more on square foot gardening please visit  - http://www.melbartholomew.com/





This post has been shared on:  The Homestead Barn Hop, Simple Saturdays Blog Hop
, The Backyard Farming Connection Hop, HomeAcre Hop, Simple Lives Thursday

Read more

Outdoor Wood Burning Garage Heater Heat Your Garage For Free Using a C

 

Recently I made a homemade outdoor wood burning boiler system to heat our garage. I have been excited to get this put together ever since I built our wood burning pool heater earlier this spring. I realized that with the same setup I was using for the pool, I could also heat water for an indoor heat system. All I needed was some sort of indoor radiator and fan and some underground tubing to cycle the water through. 

I am planning to expand my small garage wood shop this winter and did not want to have to run an electric heater all the time to heat the garage. My other options were to purchase a small propane heater, kerosene heater, or some other type of more powerful heat system but those can be expensive.  So, I decided on the wood burning heater instead. In most cases people will just put the barrel stove right in the garage, and that is a very efficient way of heating. However, my insurance company would not allow any wood burning stove (especially a homemade stove) inside the home. So this is where the wood burning boiler system design works the best. Although it is not quite as efficient as having the wood burner right in the garage it works very well to heat up our small insulated garage.

 

Weve been running it for approximately three weeks now, and with the temperatures dropping like they have, were really happy with the results.

 

For information on how I built this system, watch the video below.  Thanks for watching!

 

 

 

 

 

Read more

Wood Burning Pool Heater Upgrade and Update

We have loved having this pool heater available to boost the pool temps a bit in the spring and fall. It has worked great although over the last year and a half has lost some efficiency. Taking the advice of some great feedback on the first build I am going to try a few new ideas with this and see if I cant get a more efficient heat transfer and boost the temps up even more!

The most common feedback I received was "Why dont you wrap the copper tubing around the outside of the barrel?" This is a great idea and one that I had considered before I started the first version of the pool heater. I ended up deciding to put the tubing on the inside of the barrel because I wanted it to be engulfed in the flame with no tubing exposed to the outside air and I also didnt like the look of the tubing on the outside. In the end this is what I have found...

The coil on the inside is much more efficient at absorbing the heat; however, it does not hold up as well over time since it collects soot and creosote over time and becomes less efficient. Overall this is the best approach but you will need to take the coil out each year and clean it up.

The second approach was to wrap the coil around the outside of the barrel. This also works very well but in order for it to be most efficient it will need to be covered in some sort of insulation to keep the heat around the tubing. I noticed that the outside area of the tubing is actually working like a heat sink and cooling the outer side. With good insulation wrapped around the barrel with the tubing in between the heat would be trapped and provide the best heat exchange to the water. I am currently looking for some good outdoor insulation that I can use for this application.

In the meantime I have both the coil on the outside and the one on the inside in use and the temps I am getting are fairly close to what I had when I first started the project last year.

This has been such a fun project to work on and experiment with and I am excited for the winter season so I can test its use heating my garage again! Stay tuned for updates on that and thanks for stopping by!

Soldering equipment -

Spark start torch head - http://amzn.to/1BMl54f
Mapp Gas cylinder - http://amzn.to/14G5DdF
1/2"-3/4" pipe and fitting cleaner combo tool - http://amzn.to/1BSy2ao
Tight spaces pipe cutter - http://amzn.to/1y0INKD
Pipe cutter - http://amzn.to/1xP2qDj
Lead free solder - http://amzn.to/1wGPqvL
Flux - http://amzn.to/1yPxXqA


The Vogelzang single barrel kit can be purchased here - http://tinyurl.com/onurub9

Fiskars X27 splitting axe - http://amzn.to/1QEOfrG

All of these products and more recommended items from the SSL Family are available at the Simple Suburban Living General Store

Please follow us on....

http://www.pinterest.com/simplesuburban/
http://www.facebook.com/simplesuburbanliving
http://www.twitter.com/simplesuburban5
http://www.instagram.com/simplesuburbanliving

Read more

Wood Burning Pool Heater Heat Your Pool For Free!

 

 

You do not have to own a large homestead in order to produce your own food, live sustainably, and save money in the process.  Our goal for our family is to find ways to save money, reduce our waste, and reuse the things that are normally thrown away or recycled. 

Of course we recycle in our home.  But reusing is even better.  And landfill waste is a last resort.  This Ted Talk completely changed how we think about recycling.

Our green scraps are composted or fed to the worms or chickens.  Our paper and cardboard waste is reused.  We shred all of our paper and cardboard.  The shredded paper is composted and the shredded cardboard is turned into briquettes that we then burn in our wood burning stove.   We will post soon on that process.

I converted the Vogelzang Barrel Stove Kit I built into a simple pool heater and so far it has been working great. In this video, I show the conversion process and how I am diverting the water using the existing pool pump. This is an excellent way to heat your pool for free! I have been using recycled paper logs as well as free pallet wood for fuel and a few seasoned logs to extend the burn time.  I will post actual temperatures as soon as I get the thermometer installed into the diverter.

Copper pipes coming out of stove:

Diverter:

Watch this video to learn how to heat your pool using an inexpensive wood burner!


Todd





Products:

         

This post has been shared at:  The Homestead Barn Hop, Simple Saturdays Blog Hop, HomeAcre Hop, Simple Lives Thursday, From The Farm BlogHop, The Backyard Farming Connection Hop

Read more