New Baby Chicks Week 6 Not Babies Anymore New Watering System for Coop

Do all of us chicken mamas think our chickens are the best, smartest, and prettiest chickens ever born?  Love must be blind because we really like our chickens a lot.

And our girls even have different colored eyes!  Ours must be eggstra-special (okay, Ill stop).

But seriously, they have been out in their coop now for two weeks and everything has been going extremely well.  No casualties, and they seem very happy. 

Todd also finished the watering system in the chicken coop.

They can access their water outside under the coop.......

....or inside. 

It holds a little over 2 and a half gallons of water, here is where we fill it.  We hope to hook it up to our future rain barrel system one day.


























It took them just a few days to learn how to drink from it. Several times a day, Todd would hold each one and put their beaks up to the chicken nipple, but only when we removed their plastic watering bowl did they finally figure it out. 

Two days ago, they started going into their coop at nighttime on their own.  Up until then, we had to pick up each one and put them in the coop.  That was making me extremely frustrated because they would not go willingly and it would take the girls twenty minutes each night to get them in.  It was mad chicken/children chaos every night at bedtime.   The neighbor kids would even get in on it, too.  Needless to say, were VERY glad that instinct finally kicked in. 

If only we could convince the kids to go to bed on their own........






This post has been shared at:  The Homestead Barn Hop, The HomeAcre Hop, The Backyard Farming Connection Hop, Simple Saturdays Blog Hop

?

Read more

Awesome Aquaponics Events for Earth Week 1 of 3

Various folks are rolling out the aquaponic carpet for Earth Week. Im going to be holding tours every night, as are several dozen other aquaponics folks across the United States.

For tonight, I wanted to mention a workshop my friend, Sahib Punjabi, is putting on down in Florida. If youve seen the book, Sahib is the one who has created a garden paradise in a vacant alley behind a strip mall. Hes got everything going on down there, from floating rafts to vertical towers to media beds, including wicking beds and xeriscape-like root-zone watering of plants and trees along the verge of the parking lot.

Tomorrow Ill talk about free tours being held by members of the Aquaponics Association, but for those of you ready to move forward to some serious gardening, Sahibs workshop near Orlando, FL, is a great opportunity.

Sahib is also working with the non-profit Feed Hunger Now to train folks on how to use aquaponics to alleviate hunger, using "dead space," areas that get sun and rain but that are currently empty.

Sahibs Florida vision is very close to that of Eric Maundu, of Kijani Grows. Hundreds of thousands of people have been introduced to Erics vision of converting urban wastelands into productive gardens and farms, as shown in the video below:



A third place I know of that is working to serve the urban hungry is The Grow Haus in Denver, Colorado. Tonight Ill close leaving you with a short piece where Coby Gould talks about the neighborhood food hub concept behind The Grow Haus. Very Cool!

Read more

Aquaponics System Designs

We constructed two separate aquaponics systems: one by the name of “Nutrient Film Technique (NFT)” and the other a clay bed system. The purpose of constructing both systems is to test the efficiency of each, which, in addition to other factors, depends on the specific plants being grown (we planted leafy greens, including tomatoes and basil). In either case, it is necessary to have a large ratio of plant-growing surface area in relation to the area in which the fish are reared, in order to prevent toxic levels of ammonia rich organic matter from accumulating. Below is an outline of each system.

Clay Bed System (Sistema de Camas de Arcilla)

            The clay bed system is the simpler of the two systems. It involves a large bed of clay pieces in which the plants are grown. Clay is used for its water retaining capabilities. Water can be run through the bed either continuously or in a flood-and-drain manner. Water reaches the bed from the fish tank through a sedimentator and collector, to separate out solid organic matter produced by the fish, and a reservoir from which the water is pumped. After running down the slightly sloped bed, the water is then recycled back into the fish tank.

Nutrient Film Technique (Sistema NFT)

NFT is named as such because of the small amount of water running through the pipes, creating just a thin film of water to dampen the roots rather than having the roots completely submerged. In order to create an NFT system, holes able to fit plastic cups must be cut in PVC pipes. The PVC pipes should not exceed more than about 10-15 meters in length in order to prevent nutrient depletion for the plants at the end of the pipes. Holes must also be poked in the bottom of the plastic cups to allow for the plants to access water. Then the cups should be filled with a water-retaining medium. In some cups, we used clay, and in others we used a straw-like medium. Upon evaluation of the system, the efficiency of these two media will be compared. Along with the medium, a seedling is placed in each cup, which is then placed in the plastic pipe. This completes the hydroponic portion of the system. To complete the entire aquaponics system, a fish tank must be connected to a sedimentator and collector, as in the bed system. This must then be connected to an additional filter, and then to a reservoir from which the water will be pumped out through the plant-containing pipes. As in the bed system, the water is then recycled back into the fish tank. The need for a filter in this system is due to the small volume of the system, which does not allow room for nitrogen fixating bacteria. This design is specifically beneficial to smaller plants, as larger root systems may not be contained in the small plastic cups and large plants may become too heavy for the pipes.

System blueprints:

Read more